Rosco Off Broadway WHITE WHITE

FINISH: Matte

DILUTION: May be used straight out of the can or diluted with water. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength.

SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.

APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

FILM THICKNESS: 2 mil. Dry Film.

COVERAGE: Approximately 300 sq. ft. per gallon.

AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.

CLEAN-UP: Soap and water.